Quick Reports

The search field at the right end of the menu bar includes a drop-down selector that lets you choose a Quick report to generate reports on specific entities.  

  1. Just to the left of the Search field, click the drop-down button and select the category of the item you want to query on from the list.

  2. In the search field, specify the item as follows and click Enter to generate a report.  

Category

Value

Host

Specify a host to generate a Host Information Report. Specify a host by host name, IPv4 or IPv6 address, MAC address, or an address range.

Group

Specify a host group to generate a Host Group Information report. Specify a host group by name and group type, as defined on the Definitions > Host Groups page, separated by a colon, in the following format:   host_group_type:host_group_name  For example, ByFunction:application_servers

User

Specify the user name under which the user is logged in.

Port

Specify a port as:

  • port number (e.g., 23)

  • protocol/port number combination (e.g., tcp/80)

  • protocol/port number range (e.g., tcp/1-100)

  • port name (e.g., smtp)

Application

Specify a built-in or custom application definition by application name.  Enter this as it is listed on either tab of the Definitions > Applications page.

Protocol

Specify a protocol either by name or by number. Refer to http://www.iana.org/assignments/service-names for protocol names. Refer to http://www.iana.org/assignments/protocol-numbers for protocol numbers.

Device/Interface/ Group

Specify a device, interface, or interface group.

Device - Specify a device by the host name or IP address of the network device being used as a data source in any of the following formats:

  • device name
  • IP address

Interface – Specify an interface by the host name or IP address of the network device being used as a data source, followed by a colon and an interface identifier in any of the following formats:

  • device: interface_name

  • device: interface_index

  • device: interface_label

For example, 10.0.0.1:1

These values can be found by going to the Administration > Devices/Interfaces page and choosing the Device List view.

Interface Group – Specify an interface group name as it is defined on the Definitions > Interface Groups page.

Alternatively, specify the host name or IP address of a network device being used as a data source.

DSCP

 

Specify the decimal value, binary value, or name of a DSCP Marking, as it is identified on the Definitions > DSCP page. This field is case sensitive.

Template

Specify a template for generating a report by entering its name. The field will auto-complete the template name. The template can be a built-in template or a custom template.   more

Riverbed QoS Summary

Specify the name of a SteelHead appliance that is sending QoS configuration data to the NetProfiler.

Switch

Specify the name or IP address of a switch that has been identified on the Administration > Integration > Switch Port Discovery page.

BGP AS

Specify the BGP Autonomous System name or number.

VNI/VNI + Host

VNI - Enter either the actual VNI or the name for the VNI, which is defined on the  Definitions > Interface Groups page.

VNI + Host - Specify a host by host name, IP address, MAC address, or an address range in CIDR format. Use a space to separate the VNI and the host: <VNI or VNI name> <space> <host name or address>

VTEP

Specify the host name or IP address of a network device that is hosting a VTEP (virtual tunnel endpoint).

Search

Dashboard controls and displays

How to run a report

Dashboards