If you began your product deployment by initially configuring and loading the Edge appliance in the data center, you might have to change the IP addresses of various network ports on the Edge after you move it to its final location in the remote office.

The Edge configuration includes the IP address of the Core and it initiates the connection to the Core when it is active. Because Core does not track the Edge by IP address, it is safe to change the IP addresses of the network ports on the Edge when you move it to its final location.

If the virtual IP (VIP) of the Edge needs to be reconfigured, you will need to unmount and mount the datastores being used by the hypervisor connected to this Edge to make them accessible.