This section describes the general processes for configuring Dell EqualLogic, EMC Unity, EMC VNX, and NetApp storage arrays for backup.

1. Go to the LUN and select the Access Tab.

2. Add permissions to Core initiator/IP address and assign volume-only level access.

3. Add permissions to proxy host for the LUN and assign snapshots-only access.

To configure EMC Unity and EMC VNX

1. Create a storage group.

2. Assign the proxy servers to the group. We recommend that you provide the storage group information to the proxy host storage group.

To configure NetApp

1. Create an initiator group.

2. Assign the proxy servers to the group. We recommend that you provide the storage group information to the proxy host storage group.