Powering on the appliance

This section describes how to connect the AC power and how to power on the appliance.

Caution: In European electrical environments, you must ground (earth) the green/yellow tab on the power cord or risk electrical shock.

To power on the appliance

1. If your appliance has a master power switch, ensure that it is in the off position.

2. Plug the AC power cord into the appliance.

Note: If your model has multiple power supplies, you must plug in all the power cords or you will hear an alarm.

Figure: Connecting the AC power

3. Plug the AC power cord into an uninterrupted AC power source.

4. Press the appliance power switch on.

If the Edge appliance does not immediately power on, press the power switch off, and then press the power switch on again.

5. Check the status lights on the appliance.

For detailed information about the status lights, see the SteelFusion Edge Hardware and Maintenance Guide.