<site-name> | Site name: for example, data center. |
local | Specifies the local site name, which is where the SteelHead is located. |
default-site | Specifies the default site, which is the match anything, catch-all site that is used if nothing else matches. This site has a subnet of 0.0.0.0/0. You do not need to add a remote site if you only have one remote site and the default site is suitable. The default site cannot be removed. |
<uplink-name> | Uplink name. |
network <name> | Specifies the network name. |
gateway <ip-address> | Specifies the gateway IP address. |
interface <interface-name> | Specifies the interface name. There is one default uplink for each interface. |
bandwidth_up <kbps> | Specifies the upload bandwidth in kilobits per second. |
bandwidth_down <kbps> | Specifies the download bandwidth in kilobits per second. |
gre_tunnel yes | Enables GRE tunneling for this uplink. |
gre_tunnel no | Disables GRE tunneling for this uplink. |
probe_dscp <dscp> | Specifies the DSCP value (0 to 63) for path monitoring probes used for path selection. |
probe_timeout <timeout> | Specifies the time to wait for a probe response, in seconds, before a path-selection probe is considered lost. The default timeout value is 2 seconds. |
probe_threshold <threshold> | Specifies the number of path-selection timed-out probes before an up path is considered down or the number of received probes before a down path is considered up. The default is 3 probes. |