Configuring System Administrator Settings : Configuring Advanced Settings
  
Configuring Advanced Settings
You configure the Mobile Controller service port and Endpoint Report settings in the Configure > System Settings > Advanced Settings page. You can also view and manage network adapters on this page.
To configure the service port and Endpoint Report settings, and to manage adapters
1. Choose Configure > System Settings > Advanced Settings to display the Advanced Settings page.
Figure: Advanced Settings Page
2. Complete the configuration as described in this table.
Control
Description
Mobile Controller Service Port
Specify a port number for the Mobile Controller service port, or leave the default value of 7870.
Caution: Do not modify the service port setting until after you deploy the SteelHead Mobile Client that connects to this Mobile Controller. This modification changes the port on which the Mobile Controller listens for incoming SteelHead Mobile connections. If you change this setting, SteelHead Mobile clients trying to connect to the Mobile Controller on the old port are disconnected.
Remove Inactive Endpoints After
From the drop-down list, select a period of time after which the SteelHead Mobile information for the Endpoint report is removed from the Management Console:
•  1 Day
•  1 Week
•  1 Month
•  3 Months
Adapter List Settings
This area displays the existing network adapters in the current configuration. Use the controls to work with adapters. You can modify existing adapters or add a new one.
•  Select one or more adapters and:
–  Click Enable/Disable to toggle on or off the selected adapters.
–  Click Remove Selected Adapters to delete.
•  Click Add New Adapter to specify a new one.
3. Click Apply to apply your changes to the running configuration.
4. Click Save to save your settings permanently.