Parameter | Field or option | Default value |
General Settings: | Policy Name | Initial |
Description | None | |
Optimization Rules: In‑Path Rule | Type | Auto Discover |
Position | Start | |
Source Subnet | 0.0.0.0/0 | |
Destination Subnet | 0.0.0.0/0 | |
Port or Port Label | All | |
Preoptimization Policy | None | |
Optimization Policy | Normal | |
Latency Optimization Policy | Normal | |
Neural Framing Mode | Always | |
WAN Visibility Mode | Correct Addressing | |
Description | None | |
Protocol Settings: CIFS | Enable Latency Optimization | Enabled |
Optimize Connections with Security Signatures (that don’t require signing) | Enabled | |
Disable Write Optimization | Disabled | |
Enable Server Side Dynamic Write Throttling | Enabled | |
Buffer Size | 2048 KB | |
Enable Overlapping Open Optimization | Disabled | |
Optimize Only the Following Extensions: sldasm, slddrw, slddwg, sldprt | Disabled | |
Optimize All Except the Following Extensions: ldb, mdb | Disabled | |
Protocol Settings: SMB2 | Enable SMB2 Latency Optimization | Enabled |
Do Not Optimize Connections that can’t be Down-Negotiated | Enabled | |
Enable SMB2 Latency Optimization on Connections that can’t be Down-Negotiated | Disabled | |
Protocol Settings: MAPI | Enable MAPI Optimization - Exchange Port | Enabled Port 7830 |
Enable MAPI NSPI - NSPI Port | Disabled Port 7840 | |
Enable Encrypted Optimization | Disabled | |
Enable Outlook Anywhere Optimization | Disabled | |
Auto-Detect Outlook Anywhere Connections | Disabled | |
Protocol Settings: NFS (Mac clients only) | Enable NFS Optimization | Disabled |
Protocol Settings: Oracle Forms | Enable Oracle Forms Optimization | Disabled |
Protocol Settings: Lotus Notes | Enable Lotus Notes Optimization - Lotus Notes Port | Disabled Port 1352 |
Protocol Settings: Citrix | Enable Citrix ICA Optimization | Disabled |
ICA Port | Port 1494 | |
Session Reliability (CGP) Port | Port 2598 | |
Enable Secure ICA Encryption | Disabled | |
General Protocol Settings: Connection Settings | Maximum Connection Pooling Size | 5 |
HTTP: Settings | Enable HTTP Optimization | Disabled |
HTTP: Add New Prefetch Tag | Tag Name | None |
Tag Attribute | None | |
HTTP: Add a Subnet | Server Subnet | None |
Strip Compression 3.1.0 clients and newer | Enabled | |
Insert Cookie 3.1.0 clients and newer | Disabled | |
Insert Keep Alive 3.1.0 clients and newer | Disabled | |
URL Learning | Disabled | |
Parse and Prefetch | Disabled | |
Object Prefetch Table | Disabled | |
Reuse Auth 3.1.0 clients and newer | Disabled | |
Force NTLM 3.1.0 clients and newer | Disabled | |
Strip Auth Header 3.1.0 clients and newer | Disabled | |
Gratuitous 401 3.1.0 clients and newer | Disabled | |
SSL: General SSL Settings | Enable SSL Optimization | Disabled |
SSL: Client Authentication | Enable Client Certificate Support | Disabled |
SSL: SSL Secure Peering Settings | Traffic Type | SSL Only |
Fallback to No Encryption | Enabled | |
SSL: SSL Peering | Trust All Pre-Configured Peering Certificates | Enabled |
Trust Selected Peering Certificates | Disabled | |
Location Awareness | Enable Latency-based location awareness | Disabled |
Latency Awareness | Enable Branch warming | Disabled |
Adapters to Optimize: Add New Rule | Position | Start |
Adapter | All Adapters | |
Optimize | Yes | |
Endpoint Settings: General Settings | Show Client in the System Tray | Enabled |
Endpoint Settings: Data Store Settings | Data Store Size | 10 GB |
Endpoint Settings: Log Settings | Maximum Log Size | 5000 KB |
Maximum Number of Log Files | 2 | |
Endpoint Settings: Add a new Controller | Insert At | End |
Hostname | Name of the current controller. | |
Port | 7870 | |
Controller Options | Add a New Controller | Insert At—Select start, end, or a controller number from the drop-down list. The default value is end. Specify the order in which endpoints connect to the controllers. Client Accelerator endpoints connect according to the number you specify, starting with 1. If the system is unable to connect to 1 in the list, the system moves on to the next controller in the list. For example, if the system is unable to connect to Client Accelerator 1, then Client Accelerator 2 is attempted. If Client Accelerator 2 is successful, no further controllers in the list are attempted. |
Hostname | Name of the current controller. | |
Port | 7870 | |
Use Random Ordering of Controllers when Connecting | Disabled | |
Endpoint Settings: Windows-only Settings | Reorder Intermediate Drivers (Required for Check Point and Nortel VPN compatibility) | Disabled |
Disable TCP/IP Checksum Offloading (Requires client reboot) | Disabled |