Network topology
This section shows a graphical representation of the connection source-to-destination network topology and information associated with the different elements. This graphic varies depending on the connection type and is only relevant for optimized connections. It does not appear for pass-through connections.
The topology shows this information:
• All of the IP addresses and port numbers associated with the connection.
• Transparency mode, which describes the visibility of each actual IP address and port on the appliances to each other, for terminated connections only.
• Channel ID and type for packet-mode flows only.
• Congestion control, including the method in use to mitigate WAN congestion.
• Appliance models and RiOS versions.
• A YOU ARE HERE label identifies the appliance whose page you are viewing.
LAN/WAN table
This table shows raw tallies for LAN and WAN connections to summarize data about channel processing for a specific connection. The table varies by type of connection.
Use this table to answer questions such as:
• For any given channel, how many bytes (or packets) did the channel receive and subsequently transmit?
• Which channels have processed the most traffic? The least traffic?
• What error types and quantities were encountered for traffic inbound from the WAN?
• What error types and quantities were encountered for traffic inbound from the LAN?