cable-swap | Displays the results of the cable swap test. If the test fails, ensure you are not using a straight-through cable between an appliance port and a router, or a crossover cable between an appliance port and a switch. |
duplex | Displays the results of the duplex matching test. If one side is different from the other, then traffic is sent at different rates on each side, causing a great deal of collision. |
ip-port-reach | Displays the results of the IP port reachability test. |
net-gateway | Displays the results of the network gateway test. |
peer-reach | Displays the results of the peer reachability test. |