show ip
Displays the IP settings.
Syntax
show ip {flow-export [destination <ip-address> <port> [filter]] | destination-hostname <hostname> <port> [filter]] | flow-setting [interface all] | in-path route <interface> [static] | in-path-gateway <interface> [static] | security [peers]}
Parameters
flow-export | Displays NetFlow export settings. |
destination <ip-address> <port> | Displays the destination IP address and NetFlow collector port. |
destination-hostname <hostname> <port> | Displays the destination hostname and NetFlow collector port. |
filter | Displays filters for the NetFlow collector. |
flow-setting [interface all] | Displays NetFlow settings. |
in-path route <interface> | Displays in-path route settings for the specified interface, such as inpath0_0, and inpath1_1. |
in-path-gateway <interface> | Displays in-path gateway settings for the specified interface, such as inpath0_0 and inpath1_1. |
static | Displays configured in-path routes. |
security | Displays IPsec settings. |
peers | Displays IPsec connections with peer appliances. |
Example
amnesiac > show ip flow-setting
Configured active flow timeout: 1800
In-use active flow timeout: 1800
Inactive flow timeout: 15
The in-use active flow timeout can be different from the
configured active flow timeout when Top Talkers is enabled.
amnesiac-sh75 > show ip flow-setting
Configured active flow timeout: 1800
In-use active flow timeout: 1800
Inactive flow timeout: 15
The in-use active flow timeout can be different from the
configured active flow timeout when Top Talkers is enabled.
Product
SteelHead CX, SteelHead-v, SteelHead-c, Interceptor
Related Commands