Configuration Mode Commands : Core iSCSI commands : storage lun remove
  
storage lun remove
Removes the specified LUN from the Core configuration.
Syntax
[failover-peer] storage lun remove {alias <alias> | serial <serial>} [force]
Parameters.
failover-peer
Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service.
You can run failover-peer commands only on a Core appliance in ActiveSolo failover state.
alias <alias>
Specifies the alias of the LUN to be removed.
serial <serial>
Specifies the iSCSI serial number of the LUN to be removed.
force
Forces the removal if the LUN is online.
Usage
Before removing the LUN from the Core configuration, you must take it offline using storage lun modify offline.
Example
Core_01 (config) # storage lun remove alias LUN4Edge2 force
 
Core_02 (config) # failover-peer storage lun remove alias LUN4Edge2 force
Product
Core