Configuration Mode Commands : Core iSCSI commands : storage lun modify unmap
  
storage lun modify unmap
Unmaps the specified LUN from the Core.
Syntax
[failover-peer] storage lun modify {alias <alias> | serial <serial>} unmap [force]
Parameters
failover-peer
Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service.
You can run failover-peer commands only on a Core appliance in ActiveSolo failover state.
alias <alias>
Specifies the LUN to be modified by its alias.
serial <serial>
Specifies the LUN to be modified by its serial number.
force
Forces the unmapping if the LUN is online.
We recommend that you take the LUN offline before unmapping it. See storage lun modify offline.
Example
Core_01 (config) # storage lun modify alias LUN4Edge2 unmap
Core_01 (config) # storage lun modify serial hqD6WohWNjx unmap
 
Core_02 (config) # failover-peer storage lun modify alias LUN4Edge2 unmap
Core_02 (config) # failover-peer storage lun modify serial hqD6WohWNjx unmap
Product
Core