Configuration Mode Commands : Core iSCSI commands : storage lun modify prepop
  
storage lun modify prepop
Enable prepopulation for the LUN specified by its alias or serial number.
Syntax
[failover-peer] storage lun modify {alias <alias> | serial <serial>} prepop {enable | disable}
Parameters
failover-peer
Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service.
You can run failover-peer commands only on a Core appliance in ActiveSolo failover state.
alias <alias>
Specifies the LUN to be modified by its alias.
serial <serial>
Specifies the LUN to be modified by its serial number.
enable
Enables prepopulation from the specified LUN.
disable
Disables prepopulation from the specified LUN.
Example
Core_01 (config) # storage lun modify alias LUN4Edge2 prepop enable
Core_01 (config) # storage lun modify serial hqD6WohWNjx prepop disable
 
Core_02 (config) # failover-peer storage lun modify alias LUN4Edge2 prepop enable
Core_02 (config) # failover-peer storage lun modify serial hqD6WohWNjx prepop disable
Product
Core