Configuration Mode Commands : Core iSCSI commands : storage lun modify branch-recovery schedule
  
storage lun modify branch-recovery schedule
Sets the schedule for when branch recovery runs on the LUN.
Syntax
[failover-peer] storage lun modify {alias <alias> | serial <serial>} branch-recovery schedule {start-date <date> start-time <time> | start-now}
Parameters
failover-peer
Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service.
You can run failover-peer commands only on a Core appliance in ActiveSolo failover state.
alias <alias>
Specifies the LUN to be modified by its alias.
serial <serial>
Specifies the LUN to be modified by its serial number.
start-date <date>
Specifies the start date for the branch-recovery prepopulation schedule.
Use the format yyyy/mm/dd.
start-time <time>
Specifies the start time for the branch-recovery prepopulation schedule. Use the format hh:mm:ss.
start-now
Specifies to start branch recovery immediately.
Example
Core_01 (config) # storage lun modify alias alias-vmfs_lun branch-recovery schedule start-date
2015/03/01 start-time 00:01:00
 
Core_02 (config) # failover-peer storage lun modify alias alias-vmfs_lun branch-recovery schedule start-now
Product
Core