storage lun modify accelerate-iops enable
Enables I/O operations per second acceleration on the LUN.
Syntax
[no] [failover-peer] storage lun modify {alias <alias> | serial <serial>} accelerator-iops enable
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service. You can run failover-peer commands only on a Core appliance in ActiveSolo failover state. |
alias <alias> | Specifies the LUN to be modified by its alias. |
serial <serial> | Specifies the LUN to be modified by its serial number. |
Usage
The no command option disables I/O operations per second acceleration.
Example
Core_01 (config) # storage lun modify alias DC-B01 accelerator-iops enable
Core_02 (config) # failover-peer storage lun modify alias DC-B01 accelerator-iops enable
Product
Core