storage iscsi portal host disc-portal remove
Removes the specified discovered portal configuration from the iSCSI portal configuration.
Syntax
[failover-peer] storage iscsi portal host <hostname> disc-portal remove id <disc-portal>
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service. You can run failover-peer commands only on a Core appliance in ActiveSolo failover state. |
<hostname> | Hostname of the iSCSI portal configuration to which the additional IP address is to be added. |
id <disc-portal> | Specifies the IP address of the discovered portal to be removed from the iSCSI portal configuration. |
Usage
This command is intended to be used for portals discovered for multi-path I/O (MPIO) configurations. MPIO enables a single iSCSI portal configuration to connect with the filer on multiple IP addresses.
Use the
storage iscsi portal host rescan-portals command to discover portals on the specified iSCSI initiator portal.
Example
Core_01 (config) # storage iscsi portal host 123.45.6.789 disc-portal remove 132.45.6.780
Core_02 (config) # failover-peer storage iscsi portal host 123.45.6.789 disc-portal remove 132.45.6.780
Product
Core