storage iscsi portal host disc-portal add
Manually adds a discovered portal IP address to the iSCSI portal configuration.
Syntax
[failover-peer] storage iscsi portal host <hostname> disc-portal add ip <ip-address> [port <port-number>]
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service. You can run failover-peer commands only on a Core appliance in ActiveSolo failover state. |
<hostname> | Hostname of the iSCSI portal configuration to which the additional IP address is to be added. |
ip <ip-address> | Specifies the IP address of the added, discovered portal. |
port <port-number> | Specifies the discovered portal port number. |
Usage
If you have enabled multipath I/O (MPIO), this command enables you to add existing IP addresses available on the filer for connections with the Core.
MPIO enables a single iSCSI portal configuration to connect with the filer on multiple IP addresses.
Use the
storage iscsi portal host rescan-portals command to discover portals on the specified iSCSI initiator.
Example
Core_01 (config) # storage iscsi portal host 123.45.6.789 add 132.45.6.780
Core_02 (config) # failover-peer storage iscsi portal host 123.45.6.789 add 132.45.6.780
Product
Core