edge id iscsi initiator modify
Modifies the authorization configuration of an existing iSCSI initiator credential in the specified Edge.
Syntax
[failover-peer] edge id <id> iscsi initiator modify <name> auth {CHAP chap-user <chap-user> | None} [mutual-chap <name>]}
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. If the failover peer is unavailable, the changed configuration is automatically applied when the appliance returns to service. You can run failover-peer commands only on a Core appliance in ActiveSolo failover state. |
<id> | Self-identifier of the Edge to which the configuration is to be pushed. This value is case sensitive and limited to the following characters: 0 to 9, a to z, A to Z, period (.), and hyphen (‑). |
<name> | Name of the iSCSI initiator to modify. |
auth | Specifies one of the following authentication options: • CHAP chap-user <name>—Enables CHAP and specifies the CHAP username. You must specify an existing CHAP user. • None—Specifies no authentication. |
mutual-chap <name> | Specifies the new value for the mutual CHAP user. |
Usage
Use this command to modify the CHAP authorization settings for the specified iSCSI initiator credential at the specified Edge.
All failover-peer edge commands enable you to configure an unavailable Core through its failover peer. When the intended Core becomes operational, the new configuration is added automatically.
Example
Core_01 (config) # edge id Branch006a iscsi initiator modify iqn.1991-05.com.microsoft:jshmoe-win7.wannabe.com auth CHAP chap-user Chap13NYC
Core_02 (config) # failover-peer edge id Edge1 iscsi initiator modify iqn.1991-05.com.microsoft:jshmoe-win7.wannabe.com auth CHAP chap-user Chap13NYC
Product
Core