Configuration Mode Commands : Core commands : device-failover peerip
  
device-failover peerip
Adds or removes the specified IP address to or from the failover configuration.
Syntax
device-failover peerip {add <peer-ip> [local-if <local-interface>] | remove <peer-ip>}
Parameters
add <peer-ip>
Specifies the IP address of the failover peer.
local-if <local-interface>
Specifies the local interface for connecting with the failover peer.
remove <peer-ip>
Specifies the IP address of the peer to be removed from the failover configuration.
Usage
Use this command to modify the IP address of the failover peer. First remove the existing setting and then add the new value.
Example
Core_02 (config) # device-failover peerip remove 10.1.1.1
 
Core_02 (config) # device-failover peerip add 10.1.1.2
Product
Core