Viewing virtualization alarm reports
The Virtualization Alarms report provides status for the appliance alarms relating to potential problems with the virtualization platform, which is made up of the hypervisor and VSP.
This report is not available in Edge-v.
To view the Alarm Status report
• Choose Virtualization > Reports: Alarms to display the Virtualization Alarm Status page. Alternately, you can select the current system status that appears in the Alarms box on the Dashboard (Critical, Degraded, or Needs Attention) and then click the alarm notification to display the Virtualization Alarm Status page.
To print the report, choose File > Print in your web browser to open the Print dialog box.
The Virtualization Alarms page includes this alarm information:
Alarm | Appliance state | Reason |
Hypervisor | Degraded or Critical | License - Indicates that the hypervisor license has expired. |
| | Operation - The hypervisor is in lockdown mode. |
Virtual Services Platform | Degraded | Indicates a communication issue between VSP and the hypervisor. |
| | Connection - The hypervisor is not communicating for any of these issues: • VSP is disconnected from the hypervisor. • The hypervisor password is invalid. • VSP was unable to gather some hardware information. • VSP is disconnected. |
| | Installation - VSP is not installed properly and is powered off for any of these issues: • A hypervisor upgrade has failed. • A configuration push from the Hypervisor Installer has failed. • VSP could not gather enough information to set up an interface. • The hypervisor is not installed. License - The VSP license has expired. |
What this report tells you
The Alarm Status report answers this question:
• What is the current status of the virtualization platform on the Edge?