show wccp interface service-group
Displays WCCP settings for the specified interface and service group.
Syntax
show wccp interface <interface> service-group <service-id> [detail]
Parameters
<interface> | Interface name (for example, inpath0_0). |
<service-id> | WCCP group number. |
detail | Displays detailed information about the service group. |
Usage
With multi-inpath WCCP, any interface can participate in WCCP and different interfaces can be in different service groups. Therefore, the interface must be specified.
This command is the most useful troubleshooting command for WCCP status and supports multi-inpath WCCP. It provides the following information:
• What redirection, return, and assignment methods have been negotiated between the SteelHead and the WCCP routers.
• Whether or not the wccp override-return route-no-gre command is in use (displayed as WCCP Return via Gateway Override).
• Whether or not the SteelHead is receiving WCCP control messages from the router (I-see-you messages).
• Details the load distribution for either mask or hash assignment.
Example
amnesiac > show wccp interface inpath0_0 service-group 91
WCCP Support Enabled: no
WCCP Multicast TTL: 1
WCCP Return Path Override: no
Service Group 91 on inpath0_0:
Protocol: tcp
Priority: 200
Password: <no password>
Encapsulation Requested: l2
Assignment Requested: either
Source IP Mask: 0x1741
Destination IP Mask: 0x0
Source Port Mask: 0x0
Destination Port Mask: 0x0
Weight: 120
Hash Flags: dst-ip-hash, src-ip-hash
Router IP Address: 1.1.1.1
Product
Interceptor, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands