show topology site
Displays the network topology for a site
Syntax
show topology site {<name> | Local | DefaultSite} {areas | uplinks}
Parameters
<name> | Local | DefaultSite | Specify one of the following site names: • <name> - Site name, for example, data center. • Local - Local site name, which is where the SteelHead is located. • DefaultSite - The default site is the match anything, catch-all site that is used if nothing else matches. This site has a subnet of 0.0.0.0/0. You do not need to add a remote site if you only have one remote site and the default site is suitable. The default site cannot be removed. |
areas | Displays all the site areas. |
uplinks | Displays all the configured uplinks for a site. |
Example
amnesiac > show topology site Local
Name Network Gateway Interface BW Up (kbps) BW Down (kbps) GRE Probe DSCP Probe Timeout Probe Threshold
----- -------- ------- ----------- ------------ -------------- ---- ----------- ------------- ----------
inpath0_0* My WAN - inpath0_0 1000000 1000000 No 0 2 3
inpath0_1* My WAN - inpath0_1 1000000 1000000 No 0 2 3
inpath1_0* My WAN - inpath1_0 1000000 1000000 No 0 2 3
primary* My WAN - primary 1000000 1000000 No 0 2 3
Product
SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c
Related Commands