User Mode Commands : Displaying System Data : show ntp active-peers
  
show ntp active-peers
Displays active NTP peers.
Syntax
show ntp active-peers
Parameters
None
Example
amnesiac > show ntp active-peers
 
remote refid st t when poll reach delay offset jitter
==============================================================================
-tick.tadatv.com 10.0.22.49 2 u 874 1024 377 5.810 11.252 13.031
*wwwco1test12.mi 64.236.96.53 2 u 817 1024 377 83.799 1.636 52.182
-thor.netservice 64.113.32.5 2 u 865 1024 377 75.838 -4.941 6.927
+ftp1.riverbed.c 10.16.0.15 3 u 839 1024 377 1.740 2.610 6.121
-4.53.160.75 220.183.68.66 2 u 820 1024 377 48.183 8.513 1.116
+chief-sh158.lab 108.59.14.130 3 u 127 1024 373 1.560 5.737 13.369
 
remote conf auth key
===================================
tick.tadatv.com yes ok 12
wwwco1test12.mi yes none none
thor.netservice yes bad 42
ftp1.riverbed.c yes none none
4.53.160.75 yes ok 11
chief-sh158.lab yes ok 10
Product
SCC, Interceptor, SteelHead CX, SteelHead-v, SteelHead-c, SteelHead EX
Related Commands
Host Setup Commands