show interfaces
Displays the running state settings and statistics.
Syntax
show interfaces [<interface-name>] [brief | configured]
Parameters
<interface-name> | Interface name. For example, aux, lan0_0, wan0_0, primary, in‑path0_0, lo. |
brief | Displays the running state settings without statistics. |
configured | Displays configured settings for the interface. |
Usage
The settings and statistics displayed vary when using DHCP.
Example
amnesiac # show interfaces configured
Interface aux configuration
Enabled: yes
DHCP: no
Speed: auto
Duplex: auto
IP address: 10.0.190.139
Netmask: 255.255.0.0
MTU: 1500
Interface inpath0_0 configuration
Enabled: yes
DHCP: no
IP address: 10.11.192.139
Netmask: 255.255.0.0
MTU: 1500
Failure mode: Bypass <<fail-to-block or fail-to-bypass>>
.
.
.
Product
SCC, Interceptor, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c, Mobile Controller
Related Commands