show hardware error-log
Displays intelligent platform management interface (IPMI) system event log entries.
Syntax
show hardware error-log {all | new}
Parameters
all | Displays all IPMI SEL entries. |
new | Displays IPMI SEL entries since the last show hardware error-log command was issued. |
Example
amnesiac > show hardware error-log all
1 | 11/28/2006 11:55:10 | Event Logging Disabled SEL | Log area reset/cleared |
Asserted = yes.
2 | 01/04/2007 21:09:07 | Slot/Connector Drive | Fault Status | Asserted = yes.
3 | 01/07/2007 03:24:07 | Slot/Connector Drive | Fault Status | Asserted = yes.
Product
SCC, Interceptor, SteelHead CX, SteelHead EX, SteelHead-v, SteelHead-c, Mobile Controller
Related Commands