RSP/VSP data flow
You configure RSP/VSP data flow in the RSP/VSP Data Flow page.
For details about RSP/VSP data flow, see the SteelHead User Guide.
These configuration options are available:
Select interface to configure
Specifies an in-path interface from the drop-down list.
Add a VNI
Displays the controls to add a VNI.
Data Flow Position
Specifies one of these from the drop-down list.
• start—Locates the VNI next to the LAN. A packet coming from the appliance LAN interface goes to this VNI first.
• end—Locates the VNI next to the WAN. A packet coming from the appliance WAN interface goes to this VNI first.
• order number—Specifies the VNI order number. A lower number locates the VNI closer to the LAN. A higher number locates the VNI closer to the WAN
Add
Adds the VNI to the data flow.