Adding remote appliances
You can add remote appliances under Manage > Topology: Appliances.
1. Click New Appliance to expand the page.
2. Select the appliance type.
3. Enter the serial number of the appliance.
4. Enter the IP address or hostname of the appliance.
5. Optionally, enter a descriptive comment to help you identify the appliance.
6. Select a group. The default group is Global.
7. Optionally, enable branch-managed mode. Enable this mode to prevent any remote action from being performed on the specified appliance. When enabled, you will not be able to push configurations to this appliance from the SCC.
8. Optionally, enable auto-configure mode. Use only when policies have been configured. Enable to automatically push the current configuration (as defined by the policies for the appliance or appliance group) to the appliance the next time it connects to the SCC. This feature is available only when the appliance is disconnected. This setting is automatically disabled after a policy push.
9. Enter the administrator username for the appliance.
10. Enter the administrator password, and then confirm it.
To remove an appliance, select the check box next to the appliance name that you want to remove and click Remove Selected. The SCC redisplays the table and applies your changes to the running configuration, which is stored in memory.
To move an appliance or a group, select the check box next to the appliance name or group name that you want to move, and then click Move Selected and move the appliance or group up or down. Click Cancel Move to return the appliance to the original position in the list. When you move a group, all appliances and subgroups within that group move.