Managing appliance operation history
You can view the operation history of the system, including the operation ID, timestamp, product/model, and status of the operation in the Operation History page under Manage > Operations: Operation History. You can open each operation to view its details, including the serial number of the appliance, current status of the operation for the appliance, and messages associated with the operation.
Users can view the operation history of only those appliances and appliance groups for which they have permission.
These configuration options are available:
Operation Type
Specifies the operation type you want to display: Policy push.
Operation Status
Specifies the status of the operation you want to display: Success, Partial Success, Pending, Failed, or Incomplete.
Appliance
Specifies the IP address or serial number of the appliance.
Timestamp Upper Bound
Specifies the time for which the report should begin.
Timestamp Lower End
Specifies the time for which the report should end.
Apply Filter
Applies your settings to the report.
Under Operations, click the Date/Time value, expand the page, and view appliance hostname, product/model, status, and any messages associated with the operation. Click the > next to the appliance name to display appliance details. Click the down arrow to close the pane. Optionally, you can enter a comment and click Apply. These configuration options are available under History Management:
Clear History
Clears the history based on one of these options:
• Clear All History—Specify to clear all history.
• Clear History Older Than—Specify date (yyyy/mm/dd) and time (hh:mm:ss).
Clear
Clears the history.