show protocol profiler client
Displays information on a specific client by IP address.
Syntax
show protocol profiler client <ip-address>
Parameters
<ip-address> | The IP address of the client you would like to display profiler information on. |
Example
amnesiac (config) # show protocol profiler client 10.0.0.0
Client: 10.0.0.0
Status: Active
Optimized Count: 68
Optimized LAN Bytes: 512 kB
Optimized WAN Bytes: 257 kB
Passthrough Count: 4
Passthrough LAN Bytes: 3 kB
Bypass Count: 5
Bypassed LAN Bytes: 16 kB
Client LAN RTT: 107 ms
Error Count: 4
Consecutive Errors: 0
Product
SteelHead, SteelHead-v, SteelHead-c
Related Commands