show in-path latency-threshold
Displays the latency-detection threshold in milliseconds.
Syntax
show in-path latency-threshold
Parameters
None
Usage
With latency detection, SteelHeads measure the latency between the two SteelHead WAN interfaces. If it is less than a set threshold, the SteelHeads pass through this traffic.
This command displays the configured value. The latency threshold is in milliseconds and the default is 10 ms.
Example
amnesiac > show in-path latency-threshold
Latency Threshold Value: 10
Product
SteelHead CX, SteelHead-v, SteelHead-c
Related Commands