Configuration Mode Commands : SteelHead Interceptor commands : load balance rule pass email-notify
  
load balance rule pass email-notify
Specify whether an email reminder is needed for a load-balancing pass-through rule.
Syntax
load balance rule pass email-notify {yes | no}
Parameters.
yes
Sends email reminders every 15 days (the default).
no
Does not send email reminders.
Usage
Pass-through rules are often created as a solution for a temporary network issue. When the issue is resolved, it’s easy to forget that the rule is in use, which results in traffic not being optimized. Email reminders help you remember that these rules are in use on your network, and they help to identify any obsolete rules that you might want to delete to improve traffic optimization.
With this command enabled, you’ll receive an email message reminding you that you have pass-through rules in use on your network, and asking you to check periodically whether you still need to use them. The reminders help to identify any obsolete rules that you might want to delete to improve traffic optimization.
This command is enabled by default and it applies to load-balancing pass-through rules only.
To receive email reminders, you must also use the email notify passthrough rule enable command.
By default, you’ll receive email reminders every 15 days. To change the frequency, use the notify-timer <frequency> options of the email notify passthrough rule enable command.
The email reminders are sent to the addresses shown in the event email recipients field of the show email command.
To turn off email reminders for all pass-through rules (both in-path rules and load-balancing), use the no email notify passthrough rule enable command.
Example
amnesiac (config) # load balance rule pass email-notify yes
Product
Interceptor
Related Commands
email notify passthrough rule enable, “show email,” show load balance rules