configuration jump-start
Restarts the configuration wizard.
Syntax
configuration jump-start
Parameters
None
Usage
The configuration wizard lets you set 24 configuration parameters with a single command. Press Enter to accept the value displayed or enter a new value.
Example
amnesiac (config) # configuration jump-start
Riverbed SteelHead configuration wizard.
Step 1: Hostname? [amnesiac]
Step 2: Use DHCP on primary interface? [no]
Step 3: Primary IP address? [10.3.333.333]
Step 4: Netmask? [255.255.4.4]
Step 5: Default gateway? [10.5.5.5]
Step 6: Primary DNS server? [10.6.6.6]
Step 7: Domain name? [example.com]
Step 8: Use DHCPv6 on primary interface? [no]
Step 9: Primary IPv6 address? fe99::999:99ff:feae:9c99
Step 10: Primary IPv6 prefix length? [0] 10
Step 11: Default gateway IPv6?
Step 12: Admin password?
Step 13: SMTP server? [exchange]
14. Notification email address: joe@example.com
15. Set the primary interface speed: auto
16. Set the primary interface duplex: auto
17. Would you like to activate the in-path configuration: yes
18. In-Path IP address: 10.18.18.18
19. In-Path Netmask: 255.255.191.9
20. In-Path Default gateway:
21. Set the in-path:LAN interface speed: auto
22. Set the in-path:LAN interface duplex: auto
23. Set the in-path:WAN interface speed: auto
24. Set the in-path:WAN interface duplex: auto
You have entered the following information:
1. Hostname: amnesiac
2. Use DHCP on primary interface: no
3. Primary IP address: 10.3.333.333
4. Netmask: 255.255.4.4
5. Default gateway: 10.5.55.5
6. Primary DNS server: 10.6.6.6
7. Domain name: example.com
8. Use DHCPv6 on primary interface: yes
9. Primary IPv6 address: e99::999:99ff:feae:9c99
10. Primary IPv6 prefix length: 10
11. Default gateway IPv6:
12. Admin password: (unchanged)
13. SMTP server: exchange
14. Notification email address: joe@example.com
15. Set the primary interface speed: auto
16. Set the primary interface duplex: auto
17. Would you like to activate the in-path configuration: yes
18. In-Path IP address: 10.18.18.18
19. In-Path Netmask: 255.255.191.9
20. In-Path Default gateway:
21. Set the in-path:LAN interface speed: auto
22. Set the in-path:LAN interface duplex: auto
23. Set the in-path:WAN interface speed: auto
24. Set the in-path:WAN interface duplex: auto
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
Configuration changes saved.
Product
SCC, Interceptor, Client Accelerator, SteelHead, SteelHead-v, SteelHead-c
Related Commands