show protocol snapmirror
Displays the filer configuration settings for one or all filers.
Syntax
show protocol snapmirror [filer <name> [volume <volume-name>]]
Parameters
filer <name> | Specifies the name of the filer. |
volume <volume-name> | Specifies the volume name. |
Usage
The show protocol snapmirror command displays configuration settings for all filers.
Example
amnesiac > show protocol snapmirror
Addresses:
filer Source IP
-------- -----------
server-1 10.12.200.1
volume policies:
filer volume Opt policy Description
-------- ------ ----------- -----------
server-1 vol0 sdr-default
Product
SteelHead CX, SteelHead-v, SteelHead-c
Related Commands