show in-path hw-assist rules
Displays the hardware assist rules.
Syntax
show in-path hw-assist rules
Parameters
None
Usage
On SteelHeads and SteelHead Interceptors equipped with one or more Two-Port SR Multimode Fiber 10 Gigabit-Ethernet PCI-E or Two-Port LR Single Mode Fiber 10 Gigabit-Ethernet PCI-E cards, you can configure the system to automatically bypass all UDP connections.
You can also configure rules for bypassing specific TCP connections. By automatically bypassing these connections, you can decrease the workload on the local SteelHeads.
If the system is not equipped with the necessary card, an error message displays.
Example
amnesiac > show in-path hw-assist rules
Hardware passthrough UDP packets on 10G: no
Hardware passthrough TCP packets on 10G: no
Hardware assist rules for TCP traffic:
# Action Subnet-A Subnet-B VLAN
--- ------------- ----------------- ----------------- -----------
1 Accept all all all
Desc: wibble
def Accept all all all
-------------------------------------------------------------------------------
1 user added rule(s)
Product
Interceptor, SteelHead CX, SteelHead-v, SteelHead-c
Related Commands