ping6
Sends ICMP6_ECHO_REQUEST packets to a network host or gateway using IPv6 addresses for troubleshooting.
Syntax
ping6 [<options>]
Parameters
<options> | The ping6 command takes the standard Linux options. For detailed information, see the Linux manual (man) page. |
Usage
The ping6 command without any options pings from the primary or the auxiliary (aux) interface.
Example
amnesiac > ping6 fe80::20e:b6ff:fe04:2788 fe80::20e:b6ff:fe02:b5b0
PING fe80::20e:b6ff:fe04:2788(fe80::20e:b6ff:fe04:2788) from fe80::20e:b6ff:fe02:b5b0 primary: 56 data bytes
64 bytes from fe80::20e:b6ff:fe04:2788: icmp_seq=0 ttl=64 time=1.14 ms
64 bytes from fe80::20e:b6ff:fe04:2788: icmp_seq=1 ttl=64 time=0.186 ms
--- fe80::20e:b6ff:fe04:2788 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1001ms
rtt min/avg/max/mdev = 0.186/0.667/1.148/0.481 ms, pipe 2::0101:B3FF:FE1E:8937 2001:38dc:52::e9a4:c5:1001
Product
SCC, Interceptor, SteelHead CX, SteelHead-v, SteelHead-c, Client Accelerator
Related Commands