show protocol ssl signing certificate
Displays SSL signing status.
Syntax
show protocol SSL signing certificate [raw | text]
Parameters
raw | Specifies raw PEM format. |
text | Specifies text format. |
Example
amnesiac (config) # show protocol ssl signing certificate
Issued To:
Common Name: examle.lab.example.com
Email: examplet@example.com
Organization: Riverbed Technology, Inc.
Locality: San Francisco
State: California
Country: --
Serial Number: xx-xx-xx-xx-xx-xx
Issued By:
Common Name: examle.lab.example.com
Email: examplet@example.com
Organization: Riverbed Technology, Inc.
Locality: San Francisco
State: California
Country: --
Validity:
Issued On: Apr 13 16:38:14 2010 GMT
Expires On: Apr 12 16:38:14 2015 GMT
Fingerprint:
SHA1: xx:XX:XX:XX:XX:XX:XX:
Extensions:
X509v3 Subject Key Identifier: XX:XX:XX:XXX:XXX
:3E:69:58:35:50
Product
Client Accelerator
Related Commands
SteelHead (in the cloud) feature commands
This section describes feature commands used by the SteelHead (in the cloud). You can use the command-line to perform basic cloud configuration tasks, display configuration information, and check status. Some commands require information available only from the Riverbed Cloud Portal. We strongly recommend that you use the SteelHead (in the cloud) GUI to configure the SteelHead (in the cloud) appliance. This section also contains:
For detailed information about the SteelHead (in the cloud), see the SteelHead (in the Cloud) User Guide.