protocol domain-auth replication winsec-controller host
Configures WinSec Controller settings. WinSec Controller is a highly secure appliance for connecting server-side SteelHead appliances with domain controllers without compromising Microsoft-recommended security best practices. WinSec Controller appliances are purpose-built to operate in tightly secured environments. For details, see the WinSec Controller User Guide.
Syntax
[no] protocol domain-auth replication winsec-controller host <ip-addr/FQDN> <cr> [ok | port <port> | priority <priority>]
Parameters
host <ip-addr/FQDN> | Specifies the IP address or the Fully Qualified Domain Name (FQDN) for the WinSec Controller. We recommend that you use an IP address. |
ok | Resets failed state for this host. |
port <port> | Specify the WinSec Controller service port for this host. The value must be a number between 1 and 65535. |
priority <priority> | Specifies the priority for this host for high availability (HA) deployments. The value must be a number between 1 and 255. |
Usage
The no command disables WinSec Controller settings.
Example
amnesiac (config) # protocol domain-auth replication winsec-controller host 10.0.0.0 priority 1
Product
WinSec Controller, SteelHead CX, SteelHead-v
Related Commands
Remote packet analysis integration commands