protocol mapi encrypted ntlm-bypass enable
Enables the bypass of NTLM-authenticated encrypted MAPI traffic.
Syntax
[no] protocol mapi encrypted ntlm-bypass enable
Usage
This command supports customers who need to comply with Security Technical Implementation Guides (STIGs) SRG-NET-000521-ALG-000002 that require that NTLM authenticated traffic be bypassed. When NTLM authentication is used on an encrypted MAPI connection, the connection is bypassed and no optimization is performed.
STIG compliance is provided on a per-protocol level so you can selectively choose which protocols need to run in STIG compliance mode.
This command is disabled by default. You configure this command on the server-side SteelHead and it requires a service restart when enabled or disabled.
The no command option disables the bypass of NTLM-authenticated traffic if it has been enabled.
Example
amnesiac (config) # protocol mapi encrypted ntlm-bypass enable
amnesiac (config) # service restart
Related Commands
Product
SteelHead CX, SteelHead-v, SteelHead-c