prepop share policy access-time
Adds an access time synchronization rule to the policy.
Syntax
prepop share policy remote-path <remote-path> policy-name <policy-name> access-time {sync-relative <time> | time <time> compare-op {before |after}}
Parameters
remote-path <remote-path> | Specifies the remote path of the share. Use the format '\\server\share'. |
policy-name <policy-name> | Specifies a policy name. |
sync-relative <time> | Specifies the time relative to synchronization, in the following format:
'hh:mm:ss' |
time <time> | Specifies the reference time in the following format:
'yyyy/mm/dd hh:mm:ss' |
compare-op | Specifies the compare operator: • before - Before the specified time • after - After the specified time |
Usage
This command performs prepopulation synchronization based on the time that a file was accessed.
Example
amnesiac (config) # prepop share policy remote-path '\\10.11.61.66\backup' policy-name prepoppolicy access-time sync-relative '03:05:11'
Product
SteelHead CX, SteelHead-v, SteelHead-c
Related Commands