in-path cdp interval
Configures the refresh period for CDP. The refresh period allows for a quick recovery in failover deployments with PBR and CDP.
Syntax
[no] in-path cdp interval <seconds>
Parameters
<seconds> | CDP refresh interval in seconds. The default value is 1. |
Usage
The no command option resets the CDP refresh period to the default value.
Example
amnesiac (config) # in-path cdp interval 10
Product
Interceptor, SteelHead CX, SteelHead-v, SteelHead-c
Related Commands
Connection forwarding
This section describes connection forwarding commands, typically used with the SteelHead Interceptor.
To use connection forwarding with IPv6, both SteelHeads must be running RiOS 8.5 or later and you must enable multiple interface support. The control connection between neighbors is still IPv4 only.