tcp rate-pacing enable
Enables TCP rate pacing.
Syntax
[no] tcp rate-pacing enable
Parameters
None
Usage
When you enter the tcp rate-pacing enable command, a global data transmit limit is applied on the link rate for all SCPS connections between peer SteelHeads or on the link rate for a SteelHead paired with a third-party device running TCP-PEP (Performance Enhancing Proxy).
Rate pacing applies only to MX-TCP traffic as classified by QoS using the qos classification class command.
You can also enable rate pacing for SEI connections by defining an SEI rule for each connection.
The no command option disables the rate pacing mechanism. Rate pacing is disabled by default and does not support IPv6. You must restart the optimization service for your changes to take effect.
For details about rate pacing, see the SteelHead User Guide and the SteelHead Deployment Guide.
Example
amnesiac (config) # tcp rate-pacing enable
amnesiac (config) # service restart
Product
SteelHead CX, SteelHead-v, SteelHead-c
Related Commands