Configuration Mode Commands : System administration commands : logging trap
  
logging trap
Sets the minimum severity for messages sent to the remote syslog servers.
Syntax
[no] logging trap <log-level>
Parameters
<log-level>
Logging severity level. The follow severity levels are supported:
• emerg - Emergency, the system is unusable.
• alert - Action must be taken immediately.
• crit - Critical conditions.
• err - Error conditions.
• warning - Warning conditions.
• notice - Normal but significant conditions, such as a configuration change. This is the default setting.
• info - Informational messages.
The default value is notice.
Usage
The no command option sets the severity level for logging to none.
Example
amnesiac (config) # logging trap notice
Product
SCC, Interceptor, Client Accelerator, SteelHead CX, SteelHead-v, SteelHead-c
Related Commands
show logging
License and hardware upgrade commands
This section includes commands to manage and upgrade the hardware and commands to manage appliance licenses.
The SteelHead x80 and xx80 appliances and virtual SteelHead appliances use the set of common license management framework (CLMF) commands for basic license operations, such as install, refresh, and delete. The set of CLMF commands includes:
• license clmf customer-key - Install the customer key that is issued and sent by Riverbed.
• license clmf install - Install the license sent by Riverbed.
• license clmf feature add - Add a license key for a SteelHead-v model.
• license clmf challenge - Generate the challenge and then enter it on the Riverbed Licensing Portal.
• license clmf response - Enter the response from the licensing portal to complete the challenge and response operation.
• license clmf refresh - Initiates a license refresh and validation immediately
• license clmf delete - Delete a license.
Older appliances, such as the x55 and xx70 appliances, use the non-CLMF commands. The commands include:
• license install - Install the license sent by Riverbed.
• license delete - Delete a license.