Configuration Mode Commands : System administration commands : logging local
  
logging local
Sets the minimum severity of log messages saved on the local syslog servers.
Syntax
[no] logging local <log-level>
Parameters
<log-level>
Logging severity level. The follow severity levels are supported:
• emerg - Emergency, the system is unusable.
• alert - Action must be taken immediately.
• crit - Critical conditions.
• err - Error conditions.
• warning - Warning conditions.
• notice - Normal but significant conditions, such as a configuration change. This is the default setting.
• info - Informational messages.
The default value is notice.
Usage
The no command option sets the severity level for logging to none (no logs are sent).
Example
amnesiac (config) # logging local notice
Product
SCC, Interceptor, Client Accelerator, SteelHead CX, SteelHead-v, SteelHead-c
Related Commands
show logging