ntp peer key
Configures an NTP peer with an authentication key ID.
Syntax
[no] ntp peer {<hostname> | <ip-address>} key <key-id>
Parameters
<hostname> | NTP peer hostname or IP address. |
<ip-address> | IP address. |
<key-id> [key-id, ...] | Key identifier. The key ID values must be in the range 1 to 65534. You can specify multiple key IDs in the same list, separated by commas. When specifying multiple key IDs separated by commas, you must enclose them in quotes. |
Usage
The no command option removes the authentication key from the NTP peer configuration.
NTP authentication involves three steps that you can perform in any order:
• Configure a key ID using the ntp authentication command.
• Add the configured key ID to the trusted keys list using the ntp authentication trusted-keys command.
• Configure the NTP server or peer with the key ID using the ntp server key or ntp peer key command.
Example
amnesiac (config) # ntp peer 10.10.10.1 key 56732
Product
SCC, Interceptor, Client Accelerator, SteelHead CX, SteelHead-v, SteelHead-c
Related Commands