ntp peer
Enables an NTP peer.
Syntax
[no] ntp peer {<hostname> | <ip-address>} [version <number>]
Parameters
<hostname> | NTP peer hostname. |
<ip-address> | IPv4 or IPv6 address of the NTP peer. |
version <number> | Specifies the NTP version number. |
Usage
The no command option disables an NTP peer.
Example
amnesiac (config) # ntp peer 10.10.10.1
Product
SCC, Interceptor, Client Accelerator, SteelHead CX, SteelHead-v, SteelHead-c
Related Commands