in-path peering-ipv6 enable
Enables enhanced IPv6 autodiscovery.
Syntax
[no] in-path peering-ipv6 enable
Parameters
None
Usage
Enhanced IPv6 autodiscovery is disabled by default.
Enabling enhanced IPv6 discovery allows the SteelHeads to automatically discover other SteelHeads deployed in the network to handle IPv6 traffic intended to be optimized.
Enhanced autodiscovery is supported in SteelHeads in networks that run IPv6 (IPv6 single-stack), in addition to IPv4. SteelHeads running RiOS versions 8.5 to 9.2 require either IPv4 for the TCP inner connections between the peer SteelHeads or fixed-target rules.
You must configure an IPv6 address on the in-path interface before enabling this command.
Example
amnesiac (config) # in-path peering-ipv6 enable
Product
SteelHead CX, SteelHead-v, SteelHead-c
Related Commands