Configuration Mode Commands : System administration commands : alarm clear-threshold
  
alarm clear-threshold
Sets the threshold to clear the specified alarm type.
Syntax
[no] alarm <type> clear-threshold <threshold-level>
Parameters
<type>
See the alarm enable command for a complete listing and description of alarm types.
<threshold-level>
Threshold level. The threshold level depends on the alarm type, as do the possible values.
Usage
Use this command to set the threshold at which the alarm is cleared.
Example
amnesiac (config) # alarm cpu_util_indiv clear-threshold 70
Product
SCC, SteelHead CX, SteelHead-v, SteelHead-c
Related Commands
“alarm enable,” “alarm clear,” “show alarm,” show alarms