show storage iscsi mpio-paths
Displays the interfaces currently configured for MPIO paths.
Syntax
show [failover-peer] storage iscsi mpio-paths {lun-alias <alias> | lun-serial <serial>}
Parameters
failover-peer | Performs the command on the failover peer of the current appliance. |
lun-alias <alias> | Displays the MPIO details of the LUN indicated by the specified alias value, including path ID, remote IP and port, source IP and port, state, and so on. |
lun-serial <serial> | Displays the MPIO details of the LUN indicated by the specified serial value, including path ID, remote IP and port, source IP and port, state, and so on. |
Example
Core_01 > show storage iscsi mpio-paths lun-alias alias-vmfs_lun1
MPIO paths:
Path ID : 10.12.4.XXX:0-10.12.4.XX:3260
Remote IP : 10.12.4.39
Remote Port : 3260
Source IP : 10.12.4.XXX
Source Port : 58614
Excluded : No
Preferred : No
Connected : Yes
state : Active Optimized
Filer Preferred: no
Current MPIO read path ID : 10.12.4.XXX:0-10.12.4.XX:3260
Current MPIO write path ID : 10.12.4.XXX:0-10.12.4.XX:3260
Product
SteelFusion Core
Related Command