Policy Pages Reference : Networking policy settings : Inbound QoS interfaces
  
Inbound QoS interfaces
This feature applies only to SteelHead and SteelHead EX.
For details about Inbound QoS environments and deployments, see the SteelHead User Guide for SteelHead CX or the SteelHead Deployment Guide.
WAN link
Complete the configuration as described in this table.
Control
Description
Enable QoS on <interface> with WAN bandwidth: <kbps> kbps
Enables a WAN interface <X-Y>. Specify its bandwidth link rate in kilobits per second. The bandwidth for the default site is automatically set to this value.
Inbound QoS supports in-path interfaces only; it doesn’t support primary or auxiliary interfaces.
The link rate is the bottleneck WAN bandwidth, not the interface speed out of the WAN interface into the router or switch. For example, if your appliance connects to a router with a 100-Mbps link, don’t specify this value—specify the actual WAN bandwidth (for example, T1 or T3).
Different WAN interfaces can have different WAN bandwidths; you must enter the bandwidth link rate correctly for QoS to function properly.
Apply
Applies your settings.