Viewing Memory Paging Reports
The Memory Paging report provides the total number of memory pages, per second, utilized in the time period specified. It displays the following statistics for the time period you specify.
Field | Description |
Total Pages Swapped Out | Specifies the total number of pages swapped. If 100 pages are swapped approximately every two hours, the Core is functioning properly. If thousands of pages are swapped every few minutes, contact Riverbed Support at https://support.riverbed.com. |
Average Pages Swapped Out | Specifies the average number of pages swapped. If 100 pages are swapped every two hours, the Core is functioning properly. If thousands of pages are swapped every few minutes, contact Riverbed Support at https://support.riverbed.com. |
Peak Pages Swapped Out At <time> on <date> | Specifies the date and time that the peak number of pages were swapped. |
What This Report Tells You
The Memory Paging report answers these questions:
• How much memory is being used?
• What is the average and peak number of memory pages swapped?
About Report Graphs
In bar-graph and line-graph reports, the x-axis (or tick mark) plots time, according to the interval you select. The y-axis plots the metric of interest, such as gigabytes of bandwidth, percent of data reduction, connection counts, and so on.
To view the Memory Paging report
1. Choose Reports > Diagnostics: Memory Paging to display the Memory Paging page.
2. Customize the report by modifying the period settings:
– To the right of the table, click 5m (last five minutes), 1h (last hour), 1d (last day), 1w (last week), or All (last month).
For a custom time period, specify the start and end times in the fields immediately below these settings. Use the following format: yyyy/mm/dd hh:mm:ss.
– Use the adjustable slider at the bottom of the graph to modify the time period.